Honda 08V71-HL4-A00 Installation Instructions Manual page 5

17. Remove the front fender as shown.
• Cover the duct with a shop towel or similar to
prevent debris from entering the duct.
FRONT FENDER
DUCT
18. Remove the cap as shown.
<Left side>
BOLT
CLIP
SCREW
FRONT FENDER
(Under side)
LEFT HEADLIGHT
COVER
CAP
19. Remove the clip and connector as shown.
20. Repeat Steps 18 and 19 on the right side.
21. Remove the headlight harness as shown.
HEADLIGHT
HARNESS
(Save)
22. Remove the left headlight cover as shown.
LEFT HEADLIGHT
COVER
5 of 7
FRONT FENDER
3-PIN WATER PROOF
CONNECTOR (Green)
CLIP
HEADLIGHT
HARNESS
FRONT FENDER
SCREW
FRONT FENDER