Advertisement
OPERATION
BEFORE FIRST USE
•
Please read these instructions carefully before use and keep them for
future reference.
•
Check your local main voltage whether it is the same as stated on the
appliance.
•
Before using for the first time, remove any protective films or stickers
from the appliance and ensure the power supply is "Off".
1. Insert the lower pole into the hole of the base, then tighten using the
L-type screw. (Fig.1)
2. Place the fan body over the lower pole, then tighten using the locking
screw. (Fig. 2)
3. Position the rear grill over the motor body head, making sure that the 3
holes are aligned with the 3 prongs, then firmly screw on the rear grill
mounting nut by turning in a clockwise direction.(Fig. 3)
Fig. 1
Fig. 2
5
Fig. 3
Advertisement
