Display- And Operation- Elements - holthausen elektronik ESW-small-Compact User Manual

Electronic Vibration monitoring Unit
ESW ® -small-Compact

9. Display- and operation- elements

The display and operating elements will be accessible after unscrewing the cover of the
ESW ® -small-Compact.
Display elements
LED1 yellow flashes Limit value G1 exceeded
yellow on
LED2 red flashes
red on
LED3 green on
green flashes Self test "active"
Operating elements
P1 Potentiometer for setting Limit value G1
P2 Potentiometer for setting Limit value G2
S1 Self test inactive
Self test activated
S2 Analog output corresponds to measured value
Set-Mode (Analog output corresponds to limit value)
S3 switcher for the choice of the Limit values
Analog output corresponds to adjust Limit value G1
Analog output corresponds to adjust Limit value G2
S4 Analog output
S5, S6 measuring range adjustment (see chapter 11)
J1, J2 ground- adjustment (see chapter 13)
or adjust Limit value K1
Limit value G1 exceeded longer
than the rise time,
K1 has switched
Limit value G2 exceeded
or adjust Limit value K2
Limit value G1 exceeded longer
than the rise time,
K2 has switched
Operating voltage "on"
or error code signal
4 to 20mA
0 to 20mA
holthausen
elektronik GmbH
9
LED3
LED1 LED2
1 2 3 4 5 6
S On
P1 P2
J1,J2
10 bis 100%
10 bis 100%
OFF
ON
OFF
ON
OFF
ON
OFF
ON