Disassembly Procedure; Removing Front Grille; Removing Wall Sleeve; Removing Electrical Component Box - Sanyo STB0810C1 Technical & Service Manual

9. DISASSEMBLY PROCEDURE

9-1. Removing Front Grille

1) Pull the bottom part of the front grille toward you.
(Fig. 1- )
2) Lift up and unhook the grille to remove it. (Fig. 1- )

9-2. Removing Wall Sleeve

(1) While supporting the bottom part of the unit, pull it
out of the wall sleeve. (Fig. 2)
9-3. Removing Electrical Component
Box
(1) Remove knobs and the control panel from the
electrical component box.(Fig. 3)
(2) Remove the screws holding the lid of the electrical
component box, and also remove the wire clamp
holding the lead wires. (Fig. 4)
Front grille
Unit
Knob
Control
panel
Electrical compornent box
Lid
37
Wall sleeve
Fig. 1
Wall sleeve
Fig. 2
Fig. 3
Fig. 4
Wire clamp