Care And Maintenance; Removing Booster Covers; Replacing Booster Covers; Cleaning Booster Covers - Britax Essentials Skyline User Manual

Britax Child Safety, Inc.

Care and Maintenance

IMPORTANT: Before each use, check this child seat and its components to make sure they are in
good condition and good working order�

Removing Booster Covers

Booster Base Cover
1� Detach the two elastic loops from under the front of the seat
base�
2� Detach the two elastic loops from the back of the seat base�
3� Remove the booster base cover�
Booster Backrest Cover
1� Raise headrest (see page 10)�
2� Detach the two elastic loops from the top of the backrest�
3� Detach the four elastic loops from the bottom of the backrest�
4� Remove the backrest cover�
NOTE: Be careful not to damage the foam.
24
Booster Head Restraint Cover
1� Detach the two elastic loops from the back of the headrest�
2� Lift the head restraint cover off of the headrest�

Replacing Booster Covers

To replace covers, reverse the removal instructions�

Cleaning Booster Covers

• HAND WASH, using cold water and mild soap�
• LINE DRY, to prevent cover from shrinking�
• DO NOT bleach, machine wash, or machine dry�

Cleaning the Shell

• SPONGE CLEAN, using warm water and mild soap�
• TOWEL DRY
• DO NOT use solvents, abrasive cleaners, or disassemble the booster seat in any way except
as instructed�
• CUPHOLDERS: Dishwasher safe, top shelf only�
SKYLINE User Guide
25