Package Checklist; Safety Instructions - Paradyne FrameSaver Installation Instructions Manual

One of the following ISDN cables (20 feet – 6.1 meters).
— BRI: RJ49C ISDN-U cable if a FrameSaver 9126 with an ISDN BRI DBM.
— PRI: RJ48C cable if a FrameSaver 9128 with an ISDN PRI DBM.
Configuration information for the FrameSaver unit and the DBM.
— Local phone number for the DBM.
— SPIDs (service profile IDs) for a BRI DBM.
— Outbound Phone Number for the calling unit.
— CNIS (calling number identification service) and Inbound Calling IDs for the
answering unit.
Tools:
— 1-Slot unit: Small flat-blade screwdriver and small Phillips screwdriver.
— Multislot unit: Phillips screwdriver.

Package Checklist

Verify that your package contains the following:
Dial Backup Module (DBM)
Standoff posts, washers, and screws:
— BRI DBM: Two standoff posts, four washers, and four Phillips-head screws
— PRI DBM: Three standoff posts, six washers, and six Phillips-head screws

Safety Instructions

Please read the EMI warnings and Important Safety Instructions that come with the
FrameSaver unit.
!
HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from
damage due to electrostatic discharge (ESD) during normal
operation. When performing installation procedures,
however, take proper static control precautions to
prevent damage to equipment. If you are not sure
of the proper static control precautions, contact
your nearest sales or service representative.
Before upgrading a NAM with the DBM feature, or replacing either, locate or record the
FrameSaver unit's configuration options, or transfer the configuration using the FTP
(file transfer protocol) feature (refer to the User's Guide or Technical Reference). This
may be useful when setting up again, verifying operation, or troubleshooting.
2
496-15149