Zte MF920VS User Manual page 31

WAN Port
Protocol
Status
4. Click Save Changes to add the new filtering rule.
Portmapping
To set portmapping rules, follow the steps below:
1. Turn on the Portmapping.
2. Click Add.
3. Enter the related parameters as described in the following table.
Parameters
Name
WAN Port
LAN IP Address
LAN Port
Protocol
4. Click Save Changes to add the new portmapping rule.
Customization
■
Select Settings > Advanced Router > Customization to enable or disable UPnP and Out of
Service Notification on this interface.
Set the WAN port.
Set which protocol will be used for filtering.
Set how to handle the packet if it matches with the rule.
Description
Enter a name for the rule.
Set the WAN port.
Enter the LAN IP address.
Set the LAN port.
Set which protocol will be used for filtering.
28