Makita HR2230 Technical Information page 17

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -8. Swash Bearing Section
DISASSEMBLY
11) Remove Helical gear 26 using 1R022, 1R023 and 1R281.
as illustrated to left in Fig. 53. Swash bearing 10 and Clutch cam can now be removed by hand (right in Fig. 54).
12) Remove Retaining ring S-7 using 1R291 (left in Fig. 54). Compression spring 7 and Spur gear 10 can now be removed
by hand. (right in Fig. 54).
Fig. 53
1R281
1R022
Helical gear 26
1R023
ASSEMBLY
1) Assemble Swash bearing section using 1R032, 1R033, 1R291 and arbor press as illustrated in Fig. 55.
Note: Be sure to put Flat washer 8 in place, or else Bearing retainer will be clamped between Ball bearing 608ZZ
and Helical gear 26.
Fig. 55
Cam shaft
Clutch cam
Flat washer 8
Bearing retainer
Ball bearing
608ZZ
Swash
bearing 10
Clutch cam
Swash
bearing 10
1R032
Fig. 54
Retaining
ring S-7
1R291
Helical
gear 26
1R033
Retaining ring S-7
Spur gear 10
Ring 8
P 17 / 20
Cam shaft
Spur gear 10
Compression
spring 7
Compression spring 7
Cam shaft