Home Connect; Setting Up - Siemens CM836GPB6A Instruction Manual

Home Connect

en
oHome Connect
T his appliance is Wi-Fi-capable and can be remotely
H o m e C o n n e c t
controlled using a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven
with no network connection and can still be operated
via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
Ensure that you follow the safety instructions in this
■
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 5
Operating the appliance directly from the appliance
■
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.

Setting up

To implement settings via Home Connect, you must
have installed and set up the Home Connect app on
your mobile device.
Observe the Home Connect documents supplied for
this.
Follow the steps specified by the app to make the
settings.
The app must be open in order to perform the setup
process.
Automatic registration in the home network
Notes
You require a router that has WPS functionality.
■
You can start the Home Connect Assistant during
■
initial start-up or using the menu.
Press the menu button.
1.
Touch "Home Connect Assistant".
2.
The appliance is ready to connect to the network
automatically.
24
Press the WPS button on the router.
3.
Wait until "Network connection successful" is shown
on the display.
Touch "Connect to the app".
4.
The appliance is ready to connect to the app.
Start the app on the mobile device and follow the
5.
instructions for automatic network registration.
The process for registering is completed once
"Successfully connected to the app" is shown on the
display.
Manual registration in the home network
You can start the Home Connect Assistant during
Note:
initial start-up or using the menu.
Press the menu button.
1.
Touch "Home Connect Assistant".
2.
Touch "Connect manually".
3.
The appliance is ready to connect to the network
manually.
The SSID and the key for the oven network are
shown on the display.