Microwave Power Settings; Setting The Microwave Combined With A Type Of; Heating; Setting The Microwave - Siemens CM836GPB6A Instruction Manual

Hide thumbs Also See for CM836GPB6A:
Table of Contents

Advertisement

Microwave
en
Accessories included
Only the wire rack provided is suitable when using the
microwave only. If you use the universal pan or the
baking tray, this may create sparks, which may damage
the cooking compartment.
When using the appliance in combination with the
microwave or "Dishes" mode, you can use the universal
pan, baking tray or any other accessories that have
been included with the appliance.
When using the microwave, it is best to insert
accessories at level 1, unless otherwise specified.

Microwave power settings

A variety of microwave power settings that are suitable
for different types of food and food preparation are
available.
A cooking time must always be set to operate the
microwave. You can either apply the default cooking
time or adjust it in the relevant menu.
Setting
Food
90 W
For defrosting delicate foods
180 W
For defrosting and continued cooking 1 hr 30 mins
360 W
For cooking meat and for heating del-
icate foods
600 W
For heating and cooking food
Max.
For heating liquids
The maximum setting is designed for heating liquids
only; it is not designed for heating food. To protect the
appliance, the maximum power of the microwave is
gradually reduced to 600 W during the first few
minutes. Full power is made available again after a
cooling period.
Setting the microwave combined with a type
of heating
Not all types of heating are suitable for combining with
the microwave.
You can set output settings from 90 W to 360 W.
Suitable types of heating:
4D hot air
:
Top/bottom heating
%
Hot air grilling
4
Grill, large area
(
Grill, small area
*
Press the menu button.
1.
The operating modes menu opens.
Select the "Microwave combination" field.
2.
A type of heating, temperature, microwave output
setting and cooking time are suggested.
Touch the appropriate field and use the rotary
3.
selector to set the required values.
Press the Start/Stop button to start.
4.
The cooking time starts counting down.
20
You can change the values at any time. To do so, touch
the appropriate field and use the rotary selector to
change the values.
The cooking time has elapsed
A signal sounds. The microwave operation has finished.
x
appears in the status bar. You can cancel the audible
signal before it has finished by pressing the
If you want to set a microwave output setting again,
touch the appropriate field and enter a cooking time.
The operation starts again.
Pausing the operation
Press the start/stop button: The oven is paused. Press
the start/stop button again; the operation continues.
Open the appliance door: The operation is interrupted.
After closing the door: The operation continues.
Cancelling the operation
Press the On/Off button.
Maximum cook-
ing time

Setting the microwave

1 hr 30 mins
To achieve optimum results with the microwave, always
insert the wire rack at shelf position 1.
1 hr 30 mins
1.
1 hr 30 mins
2.
30 mins
3.
4.
The cooking time starts counting down.
You can change the values at any time. To do so, touch
the appropriate field and use the rotary selector to
change the values.
To prevent condensation from forming when the
appliance is in microwave only mode, the appliance will
automatically switch on an additional heating element
when it is set to 600 W or "Max.". The cooking
compartment and the accessories will become hot. The
cooking result is not affected by this.
Note:
settings. ~ "Basic settings" on page 18
:
At the highest settings in microwave only mode, the
drying function will automatically switch on an additional
heating element to heat the cooking compartment.
Never touch the inside surfaces of the cooking
compartment or the heating elements while they are
hot. Keep children at a safe distance.
The cooking time has elapsed
A signal sounds. The microwave operation has finished.
x
appears in the status bar. You can cancel the audible
signal before it has finished by pressing the
If you want to set a microwave output setting again,
0 min 00 s appears in the display end "Finished"
Press the Menu button.
The Operating Modes menu opens.
Select the "Microwave" field.
A microwave output setting and cooking time are
suggested.
Use the rotary selector to set the microwave output
setting and/or cooking time.
Start the microwave using the Start/Stop button.
You can switch this function off in the basic
Warning – Risk of burns!
0 min 00 s appears in the display end "Finished"
button.
0
button.
0

Advertisement

Table of Contents
loading

Table of Contents