Displays; Schematic Diagram Of Displays - Amada vm Series Operator's Manual

DISPLAYS

Schematic diagram of displays

Touch screen goes to MENU display
when zero-return of upper saw blade
guide, table, and backgauge (option)
has been completed.
(Zero-return of table: Execute
zero-return of table on ADJUST
display.)
Message display when zero-return of
upper saw blade guide, table, and
Password:
backgauge (option) has not been
"1200" completed.
In database transfer, data of cutting
conditions are transferred. Once data
of cutting conditions are transferred,
REGIST indication flashes.
Cutting conditions are
automatically set and
shown when work length (L),
height (H), and material
type are set. After start of
saw blade, cutting
conditions can be changed
on OVERRIDE display.
PROGRAM
display
COUNTER display
CNC input Manual input
Input method can be changed
by setting parameter.
Cutting rate Table feed speed
"cm 2 /min" input "mm/min" input
Enter desired cutting rate and saw blade Enter desired table feed speed and saw
running speed. After start of saw blade, blade running speed. After start of saw
cutting conditions can be changed by blade, cutting conditions can be changed
entering desired values. on OVERRIDE display.
JIS DIN
Monitor I/O display
BLADE display
BACKGAUGE display
DEVIATION display
MAINTENANCE display
HIST. ERR display
Confirmation display when
INITIALIZE button is pressed.
AISI AFNOR
III-11