CHECKING BEFORE START OF DAY'S
WORK
HYDRAULIC OIL LEVEL
CUTTING FLUID LEVEL
SAW BLADE
Before starting the machine every day, check it for the following items:
Check the hydraulic oil
level with the sight gauge.
If it is low, add the same
hydraulic oil. For the
recommended hydraulic
oils and other details, refer
to page V-6.
Check the cutting fluid level
with the sight gauge.
If it is low, add the cutting
fluid. If the cutting fluid is
deteriorated, change all of
it. For the other details,
refer to page V-6.
Check that the saw blade
is properly installed on the
drive and driven wheels
and that its teeth are not
chipped or worn.
V-3