Download Print this page

Honda 08W17-T2A-100 Installation Instructions page 2

Accessory: 17” aluminum wheel, application: 2013 accord 2 and 4-door

Advertisement

INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
"do-it-yourselfers."
NOTE:
• The illustrations of the aluminum wheels are shown for
reference purposes only.
• Install the tire. If originally epuipped with 17" wheels,
use the same original equipment tire size make and
model tire. If not originally equipped with standard 17"
wheels, use the tire recommended in the applicable
"Accessories and Touch-Up Paint" Parts Information
Bulletin for this model.
• Use a tire changer to install and remove the tires as
described in the Operation Manual furnished with the
tire changer. Do not use a tire lever to install and
remove the tires as it may cause damage to the tire and
aluminum wheel.
• The wheel nut torque is 108 N·m (11.0 kgf·m, 80 lbf·ft).
• This kit should be installed only if the ambient air
temperature is 60°F (15°C) or above.
• To allow the adhesive to cure, do not wash the vehicle
for 24 hours. Please advise the customer.
Models equipped with standard 17" wheels:
Discard the TPMS information, tire pressure information
label and supplemental information in this kit.
• Be sure to give the wheel cleaning information to your
customer.
2 of 2
If not originally equipped with standard 17" wheels,
do this:
1.
Open the driver's door. Using isopropyl alcohol on a
shop towel, thoroughly clean the area where the tire
pressure information label will attach. Remove the
adhesive backing from the label, and attach it over
the standard tire pressure information label as
shown.
ACCESSORY TIRE
PRESSURE
INFORMATION LABEL
ADHESIVE
BACKING
Remove.
2.
Attach the "Supplemental Information" page
included in this kit into the Owner's Manual. For the
method of attaching the page, refer to "Important
Information to Dealer" attached to the "Supplemental
Information" page.
AII 13001 (1210)
STANDARD TIRE PRESSURE
INFORMATION LABEL
Clean with isopropyl alcohol.
© 2012 American Honda Motor Co., Inc. – All Rights Reserved.
LEFT DOOR
JAMB
FRONT
QB21401AB

Advertisement

loading