Table of Contents
Advertisement
GB
Picture menu
Advanced settings
Use the
or
button to select Advanced settings and press
the
or
button to enter the sub menu as follows.
DCDi (Directional Correlational Deinterlacing) is used to process
moving angled edge in deinterlacing to get the smoothest and most
natural image. Press the
select On or Off.
ACC/ACM (ACC: Adaptive Contrast and Color; ACM-II: Active Color
Management-II) is used to select adaptive Brightness, Contrast and
tone control. Press the
or
select suitable mode either Vivid, Cinema, Sport or Off.
CCS (Cross Color Separation) is used to remove residual chroma
information from luminance signal which is the result of imperfect
decoding of composite video. Press the
remote control to select either Auto, Standard or Off.
DNR (Digital Noise Reduction) is available for noise reduction. Press
the
or
button on the remote control to select either Auto,
Low, Mid, High or Off.
MPEG NR (MPEG Noise Reduction): Removes unwanted ringing and
pression and decompression. Press the
remote control to select On or Off.
Film Mode
on material which underwent technologic conversion to video. Press the
or
button on the remote control to select On or Off.
Sound menu
Press the MENU button and select Sound using the
tons, press the
or
Select and adjust to obtain the best sound settings for your environ-
ment using the
or
button to select Treble, Bass or Balance
and the
or
button to adjust levels.
Bass Expander can also be selected using the
and pressing the
or
These settings automatically store when you exit the menu.
Press the BACK button to return to the previous menu.
Press the MENU button to exit menu operation.
Time menu
Press the MENU button and select Time using the
tons, press the
or
ton to return to the previous menu. Press the MENU button to exit
menu operation.
MENU OPERATION
or
button on the remote control to
button on the remote control to
or
button on the
or
button on the
or
button to enter.
or
button to select On or Off.
or
button to enter. Press the BACK but-
Current Weekday
Current Time
Use to set the current time using the Numeric buttons.
Other items in Time Menu should not be selected until Current
Time has been set.
Schedule
Use to set up to 20 separate time schedules for "Power On" or "Power
Off", select 1 ~ 20 using the
Weekday
from Sunday through to Saturday or Everyday using the
button.
Time
Use to set the schedule for "Power On" or "Power Off" of any time us-
ing the Numeric buttons.
Action
Use to set the schedule for "Power On" or "Power Off" active using
the
or
You can set Power On timer in Time menu selecting "ON" in "On
Timer Function" in Installation Mode. If it is selected "OFF", Power On
display in Time menu does not functional.
On Program
Use to select AV1, RGB, AV2, AV3, PC, DVI or Network for the
-
schedule of "Power On" using the
Active
Use to select ON or OFF using the
Program" will be inactive.
Use NUMERIC buttons [0 ~ 9] to set On Time. (Action "Power On"
– 00:00 ~ 23:59)
Once On Time has been set, when the set time is reached, the
but-
monitor will leave the stand-by status and enter to the source
automatically.
After On Time has been set, you can go on watching other pro-
grams. When the set time is reached, the monitor will automatically
switch to the preset program.
On Program can only be selected whenAction (Power On) has
been set.
Action (Power Off) can be set to turn the monitor into standby at a
selected time
Once On Program has been set, when the set time is reached, the
monitor will enter to the preset source automatically.
Use the
button
AV3, PC, DVI or Network.
Press the MENU button and select Setup using the
tons, press the
ton to return to the previous menu. Press the MENU button to exit.
but-
Menu Setup
Whenever Setup menu is accessed initially, Menu Setup will be the
default selection. Press the
or
button.
button.
or
or
or
button to select On program, AV1, RGB, AV2,
Setup menu
or
button to enter. Press the BACK but-
or
button to enter the sub menu.
GB
or
button.
or
button.
button. When set
or
but-
9
Advertisement
Table of Contents
