Advertisement
OPERATION
Leveling Foot Adjustment
• Adjust leveling position by turning the foot nut left to raise
and right to lower the foot.
Raise
Lower
Foot Nut
Workbench Height Adjustment
The Leg Panels are preset for a total workbench height of 36 inches (not including leveling feet).
The Panels can be adjusted to alter the workbench height from 31 inches to 43 inches.
• Completely unscrew the (8) M6x12 Screws from each Leg Panel as shown in figure below.
• Raise or lower the leg bottoms to the same position in the leg channels on each Leg Panel.
• Insert and securely tighten the previously removed screws.
Leg bottom
Leg channel
5
Advertisement
