Download Print this page
Craftsman 706.366440 Operator's Manual
Craftsman 706.366440 Operator's Manual

Craftsman 706.366440 Operator's Manual

Advertisement

Available languages

Available languages

Quick Links

OPERATOR'S
MANUAL
T
®
CALL 1-800-366-7278
FOR SERVICE PARTS. Refer to Service
Parts Drawing for full listing of Service Parts.
LOCATING
MODEL # iNFORMATiON
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
• The maximum weight for each drawer should be no more than
50 Ibs.
• The maximum product weight for both models, including con-
tents, should be no more than 600 Ibs.
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice
yearly.)
• Lubricate lock with graphite, (yearly).
Distributed
by Sears Brands Management Corporation,
Hoffman Estates, IL 60179
° Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
° Auto wax will preserve the unit's luster finish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
° Grease and oil can be removed with most standard
cleaning fluids. For safety, use a nonflammable cleaning fluid.
° If drawer liners are supplied, it is recommended
they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned
with soap and water.
DANGER
A_,
is used to indicate a hazardous situation which,
if not avoided, wil___[
result in serious injury or death.
WARNING
Z_
indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, _
result in minor injury, moderate injury, or property
damage.
CAUTION:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DANGER
_.
• DO NOT s;cand on this product. You may fall or cause product
to tip.
• DO NOT open more than one drawer. The product may be-
come unstable and tip.
• DO NOT step in the drawers. You may fall or cause product to
tip.
• DO NOT mount this product on a truck bed or any other
moving object.
• DO NOT move the product prior to closing and locking all the
drawers and chest lid. The drawers could come open and
make the product unstable and tip.
• DO NOT place any objects on top of chest lid. Remove all
objects from chest lid before opening.
WARNING
Z_
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving
• USE THE BRAKES
when not moving this product. This will
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external Iockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift,
or to be towed with any mechanical devices.
• The maximum weight for each drawer should never be
exceeded.
• Only transport this product empty. Properly secure when
transporting.
• DO NOT exceed maximum product weight, including contents.
See Capacities for more information.
F1911

Advertisement

loading

Summary of Contents for Craftsman 706.366440

  • Page 1 OPERATOR'S MANUAL ® ° Periodically the drawer fronts, drawer trim, and other surfaces should be cleaned with a mild detergent and water. ° Auto wax will preserve the unit's luster finish. Apply the wax as to a car. The wax will also help protect the unit against scratches.
  • Page 2: Tools Required

    NOTE: Not a JJ a ssembly instructions will r elate toyour m odel TOOLS REQUIRED: 3/8-in W rench SIDE HANDLE ATTACHMENT 1/2-in W rench items Needed: Cross4ip Screwdriver #14 - 10 x 3/4 Cross-tip Screw (Qty: 4) Cross-tip Screwdriver Process: - Attach the side handle using (4) #14 - 10 x 3/4 Cross-tip HARDWARE INCLUDED:...
  • Page 3 GAS SPRINGS INSTALLATION LABELS (iF APPLICABLE) items Needed: PrOCeSS: Gas Springs (Qty: 2) -Appiy at room temperature (above 5O°F [10°C]). 5/16 - 18Ball S tuds (Qty: 4) Clean the application surface (inside of cover) and tet 5/16 - 18Clip-on N ut ( Qty: 4 ) dry.
  • Page 4: Installing Drawers

    F,± INSTALLING DRAWERS Ball bearing slide = Pull slides and slide carrier out to fully extended position (see illustration.) Hold the slide on the cabinet while aligning it with the slide on drawer. Slightly insert one side and repeat for the other side. Slowly push drawer to its fully closed position to engage slide.
  • Page 5 MANUAL DE USUARIO ° • Lubrique la cerradura con grafito (anualmente). • Limpie con detergente suave y agua los frontales y los bordes laterales de los cajones y las demSs superficies. La cera para autom6viles preservar8 el acabado brilloso de la unidad. Aplique la cera como Io haria al carro.
  • Page 6 NOTA: No todas las instrucciones de ensambtaje se HERRAMIENTAS NECESARIAS: refieren a tu modelo. Llave Ingtesa de 3/8 inch Llave Inglesa de 1/2 inch INSTALACION DE LA MANIJA LATERAL Destornittador de Punta en Cruz E_ementos necesarios: Tornillos Phillips de No. 14 - 10 x 3/4 (Cant.: 4) Destomittador de Punta en Cruz PIEZAS INCLUIDAS:...
  • Page 7 INSTALACI6N DEPRIMAVERAS DEGAS ETJQUETAS (SJ APUCA) Elementos necesarios: Prooeso: Amortiguador neum_ticoes (Cant: 2) - Aplica a temperatura ambiente (por encima de tos 5O°F Perno Esf6rico de 5/16 - 18 (Cant: 4) [10°C]). Tuerca de Abrazadera de 5/16 - 18 (Cant: 4) - Limpia la superficie de apticaciOn (dentro de ta cubierta) Uave Allen de 1/4 ptg y d6jala secar.
  • Page 8 INSTALACION DEGAVETAS Correderas derodamientos esf6ricos o hale hacia afuera tas correderas yet soporte de las correderas hasta que queden en posici6n totatmente extendida (ver itus- traci6n). Sostenga ta corredera en et gabinete mientras to atinea con ta corredera de ta gaveta. Soporte de las correderas Corredera INSTALACI6N...