Line Out Connections - Sanyo FXCD-550 Operating Instructions Manual
Full panel detachable fm stereo/am receiver auto reverse cassette player compact disc player iso mounting with removable trim ring
Hide thumbs
Also See for FXCD-550:
- Service manual (54 pages) ,
- Operating instructions manual (27 pages) ,
- Service manual (54 pages)
Table of Contents
Advertisement
Notes
• When using a two-speaker installation, the Green, Green/Black, Violet, Violet/Black wires,
which are used for a four-speaker installation, are not used. The ends of these wires must
be covered with electrical tape to prevent them from shorting to the unit or the vehicle chassis.
Fuse 15A
NG
Burnt
LINE OUT CONNECTIONS
The unit has a line output terminals. You can use a separate amplifier to upgrade your system.
•
RCA Line-out Jacks (For Speakers)
Connect a patch cable (not supplied) from the White (left channel) and Red (right channel) RCA line output
•
jacks to the line input terminals of the external amplifier.
• When using a two-speaker installation, set the
FADER control to the center position.
• When fuse replacement is necessary remove
the blown fuse by using pliers.
Then install the new 15 amp. fuse.
OK
RCA Line-out Jacks
Rear Speaker
-24-
OUTPUT
FRONT REAR
White
L (eft)
R (ight)
Red
External
Amplifier
Front Speaker
Hide quick links:
Advertisement
Table of Contents
