Clock - Sanyo FXCD-550 Operating Instructions Manual

CLOCK

3
DISPLAY MODE CHANGE
The display on the unit can be changed by pressing DISP button
between the clock and audio display. When a radio, tape and CD function is performed while the time display
is selected, the audio display will appear for 5 seconds, then the display will return to the time mode.
ADJUSTING THE TIME
To adjust the time, press the DISP button
To adjust the minute, press the FF + button
To adjust the hour, press the - REW button
To advance the time rapidly, hold the FF + or - REW button continuously.
Press DISP button again to start the clock.
......................................................... 1, 4
CLOCK RESET
Press DISP button for more than 2 seconds and the time display blinks. While blinking, press preset
button 6 to skip to the nearest half-hour as follows:
Example: 3:00 ~ 3:29
3:30 ~ 3:59
Notes
• This unit uses a 12-hour clock.
• The clock function and radio presets are retained in memory when the audio is switched off.
2 1
.......................................... 1
.............................................. 1, 2, 3
for more than 2 seconds. The time display blinks.
.
.
3:00
4:00
-16-
4
. Press the DISP button to switch