Denon AVR-X1200W Service Manual page 72

Sound mode
Direct/Pure Direct (2-channel) z5
Direct/Pure Direct (Multi-channel) z5
Stereo
Multi Ch In
Dolby Surround
DTS Neural:X
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
Dolby Atmos
DTS Surround
DTS 96/24
DTS-HD
DTS Express
DTS:X
Multi Ch Stereo
Rock Arena
Jazz Club
Mono Movie
Video Game
Matrix
Virtual
*5, *7 - *10: "Sound modes and surround parameters"
*1 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played.
*2 This item can be selected when a Dolby TrueHD, Dolby Digital or DTS signal is played.
*3 This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input.
*4 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
*5 During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
*6 This setting is available when "Subwoofer Mode" in the menu is set to "LFE+Main".
*7 This item cannot be set when "Dynamic EQ" is set to "On".
*8 This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
*9 This item cannot be set when "MultEQ® XT" is set to "Off".
*10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
Surr.Parameter
Room Size Center Spread DTS Neural:X
S
S
S
S
S
Tone
MultEQ® XT
z7
z8
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S S
S S
S S
S S
S S
S S
S S
S S
72
Audyssey
Restorer
Dynamic EQ Dynamic Volume
z9 z9
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
z10
S
S
S
S
S
S
S
S
S
S