Denon AVR-X1200W Service Manual page 46

3.6. Operation Info Mode
3.6.1. Actions
This mode enables the unit to display the accumulated operating time, power on count and each protection count.
3.6.2. Starting up
AVR-X1200W
·While holding down buttons "ZONE2 SOURCE", "DIMMER" and "STATUS" simultaneously, press the power button to
turn on the power.
AVR-S710W
·While holding down buttons "TUNER PRESET CH+", "TUNE -" and "PRESET +" simultaneously, press the power but-
ton to turn on the power.
Select the "4. OP INFO" using the "TUNER PRESET CH+ / -" button, then press the "STATUS" button to confirm.
3.6.3. Operations
Press the "STATUS" button after starting up this device in Operation Info mode.
The following information is displayed in the following order.
(a) Accumulated operating time
FLD
O P T i m e
(b) Power on count
FLD
P . O n
(c) DC / ASO Protection count
FLD
D C : # # # / A S O : # # #
(d) Thermal Protection count
FLD
T H M A :
(e) CURRENT Protection count
FLD
C u r r e n t :
(Returns to normal display)
"STATUS"
T i m e
"STATUS"
"STATUS"
/ B :
"STATUS"
"STATUS"
H
↑ Time display
↑ Count display
46