Advertisement
Problem
No power
No sound
The remote control
won' t work
No sound from
in BT mode
Maintenance
1. Do not use harsh or abrasive cleaning agents or solvents.
2. Do not attempt to disassemble your product.
3. Do not paint your product.
4. Do not drop, throw or try to bend your product.
5. Do not expose your product to open flames.
Power Source :......................... AC 90-240V~,50/60Hz
Power Source of Remote Control:......DC
Power Consumption:...........................................>50W
Audio Power :
Woofer ................................................... 20W
Left Channel ............................................10W
Right Channel...........................................10W
Radio Coverage ................................................... FM 87.5-108.0 MHz
Impedance of Speakers :
Woofer .................................................. 16 Ohm,25W x 2
Left Channel ........................................... 4 Ohm,15W
Right Channel.......................................... 4 Ohm,15W
1 x User's Manual
1 x Remote Control --- uses 1X CR 2025 button cell (Included)
1 x RCA cable
1 x 3.5mm LINE In cable
2 x Screws
2 x Plastic Tubes
What to do
Check the connection of the power plug
between the speaker and wall outlet.
Check that the volume control is NOT at minimum
Check that it is NOT set to mute.
Inspect or replace the battery.
Make sure there are no obstacles obscuring the
front of the Speaker.
Check if you have pairing or not. It needs to pair
the external BT player and the speaker with
password "0000" before 1st time listening.
3V, 1X CR 2025 battery (Included)
11
Advertisement
