Sanyo Xacti VPC-CG6GX Instruction Manual page 184

Problem
The video clip
picture is
flickering.
The image is
too bright.
Red-eye
correction was
not successful.
Viewing
The image is
images
not in focus.
Cause
The video clip
was filmed
under
fluorescent
lighting.
The forced
flash mode is
selected.
The subject
was too bright.
The ISO
sensitivity
setting is
incorrect.
The red-eye
effect area
could not be
recognized.
The subject is
too close to the
camera.
The focus
setting is not
correct.
The camera
moved when
the [ ]
button was
pressed
(camera
shake).
The focus is
not locked
properly.
The lens is
dirty.
Action
Set the flicker-
reduction
setting to on.
Select a
different flash
mode.
Use the
exposure
correction
function.
Set the ISO
sensitivity to
t.
Not a
malfunction.
Capture the
image with the
subject within
the
photographable
range.
Select the
correct focus
setting for your
needs.
Hold the camera
correctly and
slowly press the
[ ] button
halfway to lock
the focus. Then
press the [ ]
button all the
way to capture
the image.
Clean the lens.
English
Reference
page
130
70
58
80
100
76
35, 45
—
170