Organized Living freedomRail 3 Drawer OBox Assembly Instructions

Contents of Package
Left Side
of OBox
(Inside View)
(1) Large
Drawer
Left Side
(2)
Small
Drawers
Left
Sides
Assembling the 3 Drawer OBox
Step 1: Attach Hanging Brackets
Left Side
Back Edge
Attach Hanging Brackets to Sides using Euroscrews. (If using Power Drill, set torque to low setting.)
Step 3: Attach Sides
Lock
(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
freedomRail Assembly Instructions
3 Drawer OBox
Right Side
of OBox
(Inside View)
(1) Large Drawer Back
(Inside View)
(2) Small Drawer Backs
(Inside View)
(3) Drawer Bottoms
(2) Small Drawer Fronts
(1) Large Drawer Front
Back Edge
Cam
Open
Bottom
(Inside View)
Top
(Inside View)
(3) Handles
(1) Large Machine Screws
(6)
Drawer
(For Drawer Pulls)
Right Side
(2)
Small
(6) Full Extension Drawer Glides
Drawers
Right
Sides
(34) Euroscrews
(6) 1 / " Wood Screws
Step 2: Install Connector Bolts
Right Side
Install (4) Connector Bolts into small holes on Top and Bottom Panels.
Step 4: Attach Top
(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.
Over

Tools Required

#2 Phillips
Screwdriver
(14) Connector Bolts
(2)
Hanging
Brackets
Bottom
Smaller Holes for
Connector Bolts
Power Drill
#2 Phillips Driver
Top
1