Page 2
6. Click “Wizard” & choose the your router SSID, fill in the Wi-Fi Password of your router, then click “Connect”. 7. It is around half a minute to reboot the E300. You can connect back the new SSID of E300 by locating the suitable place you need (how to locate the repeater please refer to the troubleshoots in USER MANUAL).
Page 3
WPS Setup Guide 1. Power on the E300 next to your router. 2. Press the WPS button of the front panel on E300 around 6 seconds. 3. Once release, the E300 WPS light starts blinking, press the WPS of your router within 2 minutes.
Need help?
Do you have a question about the E300 and is the answer not in the manual?
Questions and answers