Specifications - Allen-Bradley 1747-SN Installation Instructions Manual

10 Remote I/O Scanner
For Series A Scanner Retrofits
Refer to the illustration on page 9. To eliminate the need to strip the cable back,
follow these steps:
1. Attach the shield wire and a short piece of #20 AWG wire (dotted line) to the
shield lug of the RIO link connector.
2. Attach the other end of the #20 AWG wire to the ring terminal lug.
3. Attach the ring terminal lug to a chassis mounting bracket.
IMPORTANT

Specifications

Backplane Current Consumption
Operating Temperature
Storage Temperature
Humidity
Noise Immunity
Agency Certification
Publication 1747-IN060B-EN-P - June 2001
The RIO cable shield must be grounded at the scanner end only.
Ensure that the unshielded portion of the link communication
wire (blue and clear) is as short as possible.
600 mA at 5V dc
0°C to +60°C (+32°F to +140°F)
-40°C to +85°C (-40°F to +185°F)
5 to 95% without condensation
NEMA Standard ICS 2-230
UL listed / CSA Certified
Class I, Division 2, Groups A,B, C, D
CE marked for all applicable directives