Advertisement
14
Push fixture through the hole in the ceiling. This will
engage the protruding arms, thus, releasing the
springs. The springs will draw the fixture up into the
ceiling and hold it their tightly.
RX-Series Mounting
AC line
15
Connect AC line to existing junction box. Connect conduit fitting to the existing junction box. Connect the black,
white and green/yellow wires of the input leads to the black, white and green AC line wires using UL Listed twist-on
wire connectors and close the junction box (see wiring diagram).
Connect plugs
16
Connect the two quick connectors and reassemble
the connector box.
RISK OF PERSONAL INJURY - Operators shall ensure no appendages are in the path of the torsion springs as they are a pinch hazard when
released. The springs will release when the arm is flexed downward. Be cautious that no body part is in the path of the spring when released.
RISQUE DE BLESSURE CORPORELLE - Les techniciens veilleront à ce qu'aucun appendice ne se trouve sur le chemin des ressorts de torsion, car
ils présentent un risque de pincement lorsqu'ils sont libérés. Les ressorts seront libérés au moment de fléchir le bras vers le bas. Faites attention à
ce qu'aucune partie du corps ne se trouve sur le chemin du ressort à sa libération.
Final
installation
position for
springs
Reassembled
connector box
CAUTION
5
RISK OF PERSONAL INJURY -
appendages are in the path of the torsion springs
as they are a pinch hazard when released. The
springs will release when the arm is flexed downward.
Be cautious that no body part is in the path of the
spring when released.
RISQUE DE BLESSURE CORPORELLE - Les techniciens
veilleront à ce qu'aucun appendice ne se trouve sur
le chemin des ressorts de torsion, car ils présentent
un risque de pincement lorsqu'ils sont libérés. Les
ressorts seront libérés au moment de fléchir le bras vers
le bas. Faites attention à ce qu'aucune partie du corps
ne se trouve sur le chemin du ressort à sa libération.
Wiring Diagram
Line (black)
Neutral (white)
Ground (green)
17
Load springs into upright position by twisting the
springs upward and carefully insert the fixture to
the hole of the frame. Ensure fixture is secure.
CAUTION
Operators shall ensure no
Black
White
DRIVER
Green/Yellow
Springs up
Advertisement
