Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Chore-Time Manuals
  4. Racks & Stands
  5. Turbo-Cool
  6. Installation instructions manual

Chore-Time Turbo-Cool Installation Instructions Manual

Stand-off kit
Hide thumbs Also See for Turbo-Cool:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Turbo-Cool
(supplement to MV1644, Turbo-Cool
All warranties and safety issues are covered in the Base Manual, part number MV1644;
™
Turbo-Cool
System Installation manual.
Planning Information
Note:
October 2007
Installation Instruction Manual
1. Know the length of the Pad system (5' increments).
2. If installed, remove the existing inlet curtain from the wall.
3. Check the building grade/slope. The maximum allowable slope is 1-1/2'' per
pad system.
When working with an existing structure it may require additional
planning to the recommendations in this supplement.
™
Stand-Off Kit
System Instruction Manual)
™
MV1609-109 6/99
MV1609D

Advertisement

loading
Need help?

Need help?

Do you have a question about the Turbo-Cool and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Chore-Time Turbo-Cool

Summary of Contents for Chore-Time Turbo-Cool

  • Page 1 ™ Turbo-Cool Stand-Off Kit Installation Instruction Manual (supplement to MV1644, Turbo-Cool System Instruction Manual) ™ All warranties and safety issues are covered in the Base Manual, part number MV1644; ™ Turbo-Cool System Installation manual. MV1609-109 6/99 Planning Information 1. Know the length of the Pad system (5' increments).

  • Page 2: Top Covers

    Recommended Framing and Installation Turbo Cool Stand-Off Kit Installation Manual Recommended Framing and Installation Table 1. Inside Framing Dimensions Pad Height 36'' 43'' 44-3/4'' 48'' 55'' 56-3/4'' Pad Length 9/16"" 1-1/16" + 2-1/8'' 60'' 67'' 68-3/4'' 72'' 79'' 80-3/4'' 1. Install 2 x 4 and 2 x 6 framing to building according to Table Dimensions.
  • Page 3 Turbo Cool Stand-Off Kit Installation Manual Bottom Brackets Bottom Brackets Part Description End Panel Bottom End Bracket (to be reversed on non-sump end.) A Side 2 x 4 B 2 x 6 Mounting Board C 2 x 6 Trough Mounting Board 1609-4 6/99 1609-7 6/99 Figure 5.

  • Page 4: Bottom Covers

    Bottom Covers Turbo Cool Stand-Off Kit Installation Manual Bottom Covers 1. Install Bottom Cover Plates with 1/4-20 hardware supplied. 2. Ribs of Bottom Cover to be coned up. Shown in Figure 9. 3. Center, Bottom Covers from bracket to bracket. Bottom Covers Part No.
  • Page 5 20’ Extension Kit (44397) Description Part No. Description Part No. Description Part No. Bottom Cover Plate 43833 36" LH Turbo-Cool Panel 44380-1 Bottom Cover Plate 43833 Top Cover Bracket 43832 36" RH Turbo-Cool Panel 44380-2 Top Cover Bracket 43832 Bottom Bracket...
  • Page 6 Added Kit Part Numbers Various Added Part numbers to Bom’s Contact your nearby Chore-Time distributor or representative for additional parts and information. CTB Inc. P.O. Box 2000 • Milford, Indiana 46542-2000 • U.S.A. Phone (574) 658-4101 • Fax (877) 730-8825 E-Mail: ctb@ctbinc.com •...