Table of Contents
Advertisement
3.
Oil:
4.
Air Filter:
Change oil, if integral screen or small
filter is used.
Inspect and clean or replace as necessary;
5.
High Tension Leads: Inspect for chafing and deterioration.
6.
Magnetos:
7.
General:
8.
Exhaust System:
9.
Adjustments &
Repairs:
9.
Adjustments & .
Repairs:
Check and adjust only if discrepancies
were noted in Step I.
Visually check hoses, lines, wiring, fit-
tings,baffles, etc. for general condition.
Inspect for condition and leaks.
Perform service as required on any items
Perform service as required on any items
that are not within specifications.
10. Engine Conditions:
Run up and check as necessary for any
items serviced in Step 9. Check engine for
oil and fuel leaks before returning to .
service.
100 HOUR INSPECTION
Perform all items listed under 50 Hour Inspection and add the
following:
1.
Oil:
2.
Valves/ Cylinder:
3.
Cylinders, Fins,
Baffles:
Drain while engine is warm. Refill sump.
Check compression. (Refer to Service
Bulletin M84-15)
Inspect.
8-4
Hide quick links:
Advertisement
Table of Contents
