Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read
these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
!
CAUTION: RISK OF PERSONAL INJURY. ENAMELED STEEL BATHS ARE HEAVY.
THIS IS A TWO PERSON INSTALLATION.
Recommended Tools & Materials
• Tape Measure
• Level
• Square
1
ROUGH-IN DIMENSIONS
NOTE: Measurements may vary plus or minus 1/4" (6mm).
OPTIONAL TO FINISHED FLOOR
[USUALLY BETWEEN
65" & 78"
(1651mm & 1981mm)]
C/L OF
VALVES
12"
(305mm)
(83 mm)
2-3/4"
(70mm)
DETERMINE FRAMING ROUGH-IN
Construct a recess using 2 x 4 construction designed
for your particular installation. Allow for thickness of
finished wall material.
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a , I n c .
Enameled Steel Bath Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
Page 2
This limited warranty is void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damages; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by American Standard.
This manual is also suitable for:
New salem 0255.212New solar 0263.112New solar 0263.212