About This Manual; Copyrights; Trademarks; General - ABB REF 541 User Manual

1MRS755312
1.
1.1.
1.2.
1.3.
Connectivity Packages
User's Guide

About this manual

Copyrights

The information in this document is subject to change without notice and should not
be construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for
any errors that may appear in this document.
In no event shall ABB Oy be liable for direct, indirect, special, incidental or
consequential damages of any nature or kind arising from the use of this document,
nor shall ABB Oy be liable for incidental or consequential damages arising from
use of any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without written
permission from ABB Oy, and the contents thereof must not be imparted to a third
party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
Copyright © 2005 ABB Oy
All rights reserved.

Trademarks

ABB is a registered trademark of ABB Group.
All other brand or product names mentioned in this document may be trademarks or
registered trademarks of their respective holders.

General

Connectivity package is a collection of software and information related to a specific
protection and control terminal (IED). It provides means for applications and tools
to connect and interact with IED.
This manual introduces the installation and uninstallation of the connectivity
packages and the main functions of the Connectivity Package Manager.
Connectivity Package Manager is a tool that helps the user to associate the right
connectivity package versions to different applications and tools. This manual
introduces also shortly the content and the usage of the connectivity packages as
well as logical node naming principles.
For more information on handling connectivity packages in different applications
and tools, refer to Section 1.8. Related documents.
This manual applies to the following connectivity packages:
• REF 541/543/545 Connectivity Package v. 1.1
• REM 543/545 Connectivity Package v. 1.1
• RET 541/543/545 Connectivity Package v. 1.0
REF 541/543/545
REM 543/545
RET 541/543/545
5