Adding Connectivity Packages - ABB REF 541 User Manual

1MRS755312
3.2.2.
Connectivity Packages
User's Guide
Fig. 3.2.1.-1 Setting latest versions to all nodes
To select the latest version for only those connectivity packages which do not have
any version selected, select Set Latest > Set Latest to Unchecked Packages. This
command leaves the already selected connectivity package versions as they are, see
Fig. 3.2.1.-2.
Fig. 3.2.1.-2 Setting latest versions to unactive nodes
If the connectivity package version has information about supported IEDs, this
information is shown in the text box under Supported IEDs, see Fig. 3.2.1.-3. With
this information you can confirm the right version of the connectivity package.
Fig. 3.2.1.-3 Specific IED's supported versions

Adding connectivity packages

Connectivity packages can be installed to the local computer also with the
Connectivity Package Manager. You can install connectivity packages from any
location you have access to.
To add a new connectivity package:
1. Select File > Add new package. The Open dialog displays.
REF 541/543/545
REM 543/545
RET 541/543/545
A050311
A050312
A050052
17