Travel Time; Default; Avoid Area - Hyundai Veloster 2012 Owner's Manual

INFO/SETUP

Travel Time

1. Press [INFO/SETUP] > [Setup] > [Navigation] >
[Travel Time].
2. Touch a or d on the [Residential(MPH)], [Main
street (MPH)], and [Freeway (MPH)] controls
to adjust the speed. Touch [Reset] to set the
speeds to the default settings.

Default

1. Press [INFO/SETUP] > [Setup] > [Navigation] >
[Default].
2. Check the desired options, then touch [Reset].
• [Setting]: Initializes all the settings related
with navigation. (This will erase any
customized settings.)
• [Memory Point]: Initializes all the settings
related with the registered destination. (This
will erase any registered addresses.)
26

Avoid Area

This allows you to avoid the set area by setting
a location on the map screen when a route is
activated.
Registering an area to avoid
This allows you to register an area to avoid. You can
register up to fi ve areas to avoid.
1. Press [INFO/SETUP] > [Setup] > [Navigation] >
[Avoid Area].
2. Touch [Add New Avoid Area].
3. Touch one of the items shown in "Area 1 ~ Area
5".