No.
Part name
Front
2
1. How to remove
cabinet
1) Perform 1 of 1.
2) Remove the screw between front cabinet
3) Remove the screw between front cabinet
4) Remove the screw between front cabinet
5) Remove the screw between front cabinet
2. How to install
1) Insert front panel's hook into side cabinet
2) Insert side cabinet (left)'s hook into front
3) Insert the removed screws to their
Procedure
and side cabinet (right). (ST1T Ø4 × 8,
1 pc.)
and inverter.
(ST1T Ø4 × 8, 2 pcs.)
and bottom slab.
(ST1T Ø4 × 8, 3 pcs.)
and motor base.
(ST1T Ø4 × 8, 2 pcs.)
side cabinet (left). Remove by pulling
the upper part.
(left).
cabinet's corner hole.
positions.
- 97 -
FILE NO. SVM-18043
Remarks
Motor base
Front cabinet
Corner hole
Hook
Corner hole
Hook