``DRY'' ( ) Operation
How it works?
Power failure
during operation
Clicking Sound
Clicking sound is
heard from the air
conditioner
Remote Control Unit
IMPORTANT
KS1852 and CL1852
Combination
OI-330-15EG
Special Remarks
Once the room temperature reaches the level that was set, the unit
•
repeats the cycle of turning on and off automatically.
During DRY operation, the fan speed is automatically set to LOW or
•
VERY LOW; the fan speed then switches back and forth between LOW
(for 20 seconds) and VERY LOW (for 10 seconds).
"DRY" operation is not possible if the indoor temperature is 59 °F or
•
less.
In the event of power failure, the unit will stop. When the power is
•
turned on again, the unit restarts within five minutes.
In cooling and drying operation, any plastic parts may expand or shrink
•
due to a sudden temperature change. In this event, a clicking sound
may occur. This is normal, and the sound will soon disappear.
The remote control unit sends the setting condition to the air
•
conditioner regularly at five minute intervals.
When this unit is combined with the CL1852 outdoor unit, set the indoor
•
airflow to medium or high when the outdoor temperature drops below
32 °F to prevent condensation from forming at the indoor unit.
15