Sanyo KS1251 Instruction Manual page 21

Anti-mold filter
How to remove the
anti-mold filter
Cleaning
How to replace the
anti-mold filter
OI-330-21EG
Care and Cleaning (continued)
The anti-mold filter behind the air intake grille should be checked and
cleaned at least once every two weeks.
1. Grasp both ends of the
air intake grille and pull
it out and up.
2. Push the anti-mold
filter up slightly, and
then pull it down.
Use a vacuum cleaner to remove light dust. If there is sticky dust on the
filter, wash the filter in lukewarm, soapy water, rinse it in clean water and
dry it.
1. With the ˝FRONT˝ mark facing
you, slide the anti-mold filter
up into the unit and then lower
the handle into the groove on
the unit.
2. After installing the anti-mold
filter, press the locations
marked by the arrows (
and close the air intake grille.
Air intake grille
Air intake grille
)
Anti-mold
filter
Insert into the groove on the unit.
Anti-mold filter
21