Table of Contents
Advertisement
9.
Stopping at the Grip of a Cable Car Vehicle or Pulley Array
Stop before the grip of the cable car vehicle.
The hook of the safety line must be attached to a suitable place during every action.
Before the grip of the cable car or before the roller battery at the cable car tower, the speed is reduced by pulling the
hand brake lever.
The immediate stop takes place by taking the hand off the dead man's brake.
The journey must be stopped before reaching the roller battery or driving up to the stop pad.
10. Moving the Rescue Carriage at the Grip of the Cable Car Vehicle
The hook of the safety line must be attached to a suitable place during every action.
The lever of the dead man's brake is folded away upwards.
Before getting off the rescue carriage and changing to the cable car vehicle, the handbrake lever is released slightly
to make it easier to move the device over the grip and take it off the rope (stranded rope).
To move the rescue carriage over the grip of the cable car vehicle, the quick release pin with T-grip is pulled out from
the inner side of the grip.
The lower part of the rescue carriage is swung away and the rescue carriage is brought to the other side over the
stop pads and grip.
After that, the lower part is folded together and the suspension is locked with the quick release pin.
14
Advertisement
Table of Contents
