Table of Contents
Advertisement
4.5 Stopping at the Grip of a Cable Car Vehicle or Pulley Array
Stop before the grip of the cable car vehicle.
The hook of the safety line must be attached to a suitable place during every action.
Before the grip of the cable car or before the roller battery at the cable car tower, the speed is reduced by pulling the
hand brake lever.
The immediate stop takes place by taking the hand off the dead man's brake.
4.6 Moving the Self-driven Carriage at the Grip of the Cable Car Vehicle
The lever of the dead man's brake is folded away upwards.
The handbrake lever must be fully released.
To move the self-driven carriage over the grip of the cable car vehicle, the quick release pin with T-grip is pulled out from
the inner side of the grip.
The lower part of the self-driven carriage is swung away and the self-driven carriage is brought to the other side over
the stop pads and grip.
After that, the lower part is folded together and the suspension is locked with the quick release pin.
The rope grip is driven over when the device is open.
4.7 Taking the Self-driven Carriage off the Rope
If the self-driven carriage is taken off the rope, the quick release pin with T-grip is pulled out from one side.
The lower part of the self-driven carriage is swung away and the self-driven carriage is removed from the rope.
16
Advertisement
Table of Contents
