Chapter 2 Setting Up The Video Bridge; Connection Overview - Pace 405 User Manual

Setting up the video
bridge
Connect the 405 video bridge to your existing gateway, then connect devices to the
video bridge using the 5 GHz wireless connection.
Note: We recommend that you use the included stand to install the video bridge
vertically. This prevents things from being stacked on top of it, which can block vents
and cause the device to overheat.

Connection overview

Connect the video bridge to the gateway using a wired connection, then connect
devices to the video bridge using a wireless connection.
The following illustration shows an overview of possible connections.
Phone
outlet
6 Chapter 2
Video bridge
Gateway
(access point)
WPS
ETHERNET
RESET
POWER
Setting up the video bridge
Client devices
Wireless
connection
2
Wireless
set-top box
WPS
Video bridge
(client)
ETHERNET
RESET
POWER
Computer or
other device