Table of Contents
Advertisement
5. Return to the station and press the WPS button on the back of the device.
Connecting other devices
You can connect other wireless devices—such as tablets, mobile phones, or
notebooks—to the access point if you need a 5 GHz connection. By default, the
gateway is configured with a network name (SSID) and WPA-PSK/WPA2-PSK
security.
1. On the wireless device, view the available wireless networks. The specifics of how
2. Select the appropriate wireless network name and connect.
3. At the prompt, enter the wireless network key.
After the gateway recognizes the wireless device, the Wireless light turns steady
green, and blinks when the wireless device starts transferring data with the gateway.
12
Chapter 2
The WPS lights on the front of the devices will blink while they search for each
other (discovery mode). The wireless access point and the station will stay in
discovery mode for up to two minutes while the devices try to establish a
connection.
If the station box does not connect to the wireless access point after a few
minutes, try this procedure again. If the devices still do not connect, see
"Connection issues" on page 14.
you do this depend on the device you are connecting.
The SSID (default wireless network name) and wireless network key are printed
on the label on the side of the access point.
Setting up the video bridge
Advertisement
Table of Contents
