Connecting A Station - Pace 405 User Manual

Connecting a station

The video bridge can also be used as a client device. In this scenario, you would have
two video bridges: the access point and the station. The access point is the video
bridge that is connected to the gateway, and the station is the one connected to the
set-top box.
Video bridge
Gateway
(access point)
Phone
outlet
1. Ensure that the wireless access point is connected and turned on. See "Setting up
the video bridge" on page 7.
2. Connect the station to the set-top box using the yellow Ethernet cable.
Note: A 6-foot yellow Ethernet cable is provided with the video bridge. If you need
another cable, use a Cat 5 or Cat 5e Ethernet cable.
3. Connect the power adapter for the station. See "Connecting power" on page 8.
4. Go to the wireless access point and press the WPS button on the back of the
device.
WPS button
Chapter 2 Setting up the video bridge
Video bridge
WPS
ETHERNET
RESET
POWER
TV
(station)
WPS
ETHERNET
RESET
POWER
Set-top box
11