Advertisement
Basic Operations
4
Press
.
The unit plays all the tracks once.
* VOLUME +
,
and
have a tactile dot.
To
Press
Pause playback
. To resume play, press it
again.
Before using the unit
Stop playback
.
Go to the next
.
To turn on/off the power
track
Press POWER
.
Go back to the
.
previous track
Note
When turning on the power, hold down POWER
until OPR/BATT
Locate a point
(forward) or
indicator
lights up.
while listening to
during playback and hold it
the sound
until you find the point.
To adjust the volume
Locate a point
(forward) or
Press VOLUME +, –
.
while observing
in pause and hold it until you
To listen through headphones
the display
find the point then press
Connect the headphones to the (headphones) jack
Remove the CD
PUSH OPEN/CLOSE
on the back of the unit.
Tips
To reinforce the bass sound
Playback starts from the track you last stopped playing (Resume
Press MEGA BASS
.
play). During stop, the track number to be played is displayed.
"MEGA BASS" appears in the display.
To cancel the resume play (to start play from the beginning of the
first track), press
while the CD is stopped. When you open
To return to normal sound, press the button again.
the CD compartment or turn off the unit, the resume play is also
canceled.
Playing a CD
Listening to the radio
1
Press POWER
.
1
Press POWER
.
2
Press CD
.
2
Press RADIO BAND
repeatedly.
3
Press PUSH OPEN/CLOSE
and place a disc with
Each time you press the button, the radio band
the label side up on the CD compartment.
toggles between AM and FM.
To close the CD compartment, press PUSH OPEN/
CLOSE
.
4
*
–
1
1
2
2
3
3
Hold down TUNE + or –
until the frequency digits
Recording on a tape
begin to change in the display.
The unit automatically scans the radio frequencies
1
and stops when it finds a clear station.
Press POWER
If you cannot tune in a station, press TUNE + or –
2
Press
repeatedly to change the frequency step by step.
insert a blank tape with the side you want to record
When an FM stereo broadcast is received, "St"
on facing upward. Use TYPE I (normal) tape only. To
appears.
close the tape compartment, press CLOSE
3
Tip
Select the program source you want to record.
If an FM broadcast is noisy, changing the current status to
To record from the CD player, place a CD and press
monaural usually reduces the noise.
1 Press MODE
.
CD
"St" or "Mo" appears.
To record from the radio, tune in the station you
2 While "St" is displayed, press MODE
to display "Mo. "
want.
Playing
4
Press
time
(
Playing a tape
To
1
Press POWER
.
Pause recording
2
Press TAPE
.
3
Press
, and insert the tape into the tape
Stop recording
compartment with the side you want to play facing
upward. Use TYPE I (normal) tape only. To close the
Tips
tape compartment, press CLOSE
.
Adjusting the volume or the audio emphasis will not affect the
Make sure there is no slack in the tape to avoid
recording level.
If the AM program makes a whistling sound after you have
(backward)
damaging the tape or the unit.
pressed
position of ISS (Interference Suppress Switch) that most decreases
the noise.
For best results, use AC power as the power source for recording.
(backward)
To erase a recording, proceed as follows:
1 Press POWER
.
2 Insert the tape whose recording you want to erase.
.
3 Press TAPE
4 Press
4
Press
.
The unit starts playing.
To
Press
Pause playback
. To resume play, press it
again.
Stop playback
.
Fast-forward or
or
(fast forward or
rewind*
rewind)
.
Eject the cassette
.
* When the tape is wound to the end, press
to release
or
.
3
1
2
3
1
2
4
1
2
3
1
2
3
4
4
*
*
Other Operations
Using the display
.
To check the total track number and playing
time of the CD
to open the tape compartment and
Press
once if the CD is stopped and twice if the
CD is playing. After the total track number is displayed,
.
the total playing time is displayed. To check the total
track number again, press DISPLAY/ENTER
To check the current track number of the CD
.
Press DISPLAY/ENTER
while playing a CD.
To check the current preset station number of
the radio
to start recording
Press DISPLAY/ENTER
when you are listening to a
is depressed automatically).
preset station.
Press
. To resume recording, press
Selecting a CD play mode
it again.
Press MODE
(press
, then press MODE
.
during playback) until "
1", " ", "SHUF", "SHUF" and
" ", "PGM", or "PGM" and " " appear in the display.
Then proceed as follows:
To Select
Select
Then do this
in step 4, press MODE
on the unit to select the
Repeat a
"
1"
Press
or
single track
select the track that you
want to repeat, then press
.
.
Repeat all
" "
Press
tracks
.
.
Shuffle play
"SHUF"
Press
Repeat tracks
"SHUF"
Press
in random
and
order
" "
Program play
"PGM"
Press
or
press DISPLAY/ENTER
for the tracks you want to
program in the order you
want up to 20 tracks. Then
press
Programed
track
Repeat
"PGM"
Press
or
programed
and
press DISPLAY/ENTER
tracks
" "
for the tracks you want to
program in the order you
want up to 20 tracks. Then
Press
1
SHUF
SHUF
PGM
PGM
To cancel the selected play mode
Tip
The preset radio stations remain in memory even if you unplug the
Press MODE
(press
, then press MODE
AC power cord or remove the batteries.
during playback) repeatedly until the selected mode
disappears from the display.
Playing preset radio stations
To check the programed track and playing
order in the display
1
To check the order of tracks before playing, press
Press POWER
DISPLAY/ENTER
(press
, then press DISPLAY/
2
Press RADIO BAND
.
ENTER
during playback).
3
Press PRESET + or –
Every time you press the button, the track number
appears in the programed order.
To change the current program
Connecting optional components
Press
once if the CD is stopped and twice if the
CD is playing. The current program will be erased. Then
You can enjoy the sound from an optional component
create a new program following the programming
such as a portable digital music player through the
procedure.
speakers of this unit. Be sure to turn off the power
of each component before making any connections.
Tips
For details, refer to the instruction manual of the
If you try to program 21 tracks or more, "FULL" will appear in the
component to be connected.
display.
You can play the same program again, since the program is saved
1
Connect the AUDIO IN jack
until you open the CD compartment.
jack of the portable digital music player or other
You can record your own program. After you have created the
components using an audio connecting cable (not
program, insert a blank tape and press
to start recording.
supplied).
The resume function does not work during shuffle play or
program play.
2
Press POWER
3
Turn the connected component on.
to
4
Presetting radio stations
Press AUDIO IN
connected component.
You can store radio stations into the unit's memory.
The sound from the connected component is
You can preset up to 30 radio stations, 20 for FM and
output from the speakers of this unit.
.
10 for AM in any order.
To connect the unit to a TV or VCR, use an extension
1
Press POWER
.
cable (not supplied) with a stereo-mini jack on one
.
2
Press RADIO BAND
to select the band.
end and two phono plugs on the other end.
.
3
Hold down AUTO PRESET
for 2 seconds until
Tip
"Auto" flashes in the display.
You can record the sound of the connected component. Insert a
blank tape and press
4
Press DISPLAY/ENTER
.
, then
The stations are stored in memory from the lower
frequencies to the higher ones.
If a station cannot be preset automatically
You need to preset a station with a weak signal manually.
.
1
Press POWER
.
2
Press RADIO BAND
to select the band.
3
Tune in a station you want using TUNE + or –
.
Playing
4
order
Hold down MEMORY
for 2 seconds until the
preset number flashes in the display.
, then
5
Press PRESET + or –
until the preset number you
want for the station flashes in the display.
6
Press DISPLAY/ENTER
.
The new station replaces the old one.
.
1
2
3
1
2
3
4
1
2
3
4
1
2
3
–
4
5
–
6
.
to select the band.
to tune in the stored station.
to the line output
to turn the unit on.
and start playback on the
.
–
Advertisement
