Fisher & Paykel EB60 Installation Manual page 10

IMPORTANT!
All electrical work may only be carried out by suitably qualified and competent persons in accordance with national and
●
local safety regulations.
This warming drawer must be earthed.
●
Before placing the coffee maker into the cavity, route the power cord into the back of the cavity and plug it in to the switched
socket. The switched socket should be in an easily accessible area within 900mm of the centre rear of the product.
Power requirements
Model Code Power
EB60 6.1 A
8 |
COFFEE MAKER INSTALLATION GUIDE
8
CONNECT THE WARMING DRAWER TO THE MAINS SUPPLY
Voltage Wattage Hz
220-240 V 220-240 W 50-60 Hz