Download Print this page
schmersal PS116 series Operating Instructions

schmersal PS116 series Operating Instructions

Position switches

Advertisement

Quick Links

Operating instructions
Position switches
Operating instructions. . . . . . . . . . . . .pages 1 to 4
EN
Translation of the original operating instructions
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear. The operating
instructions must be available in a legible condition and a complete
version in the vicinity of the device.
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only.
Do not bring the equipment into operation until you have read and
understood the operating instructions.
1.3 Appropriate use
The products described in these operating instructions are developed to
execute safety-related functions as part of an entire plant or machine. It
is the responsibility of the manufacturer of a machine or plant to ensure
the correct functionality of the entire machine or plant.
1.4 General safety instructions
The user must observe the safety instructions in this operating instruc-
tions manual, the country-specific installation standards as well as all
prevailing safety regulations and accident prevention rules.
Further technical information can be found in the Schmersal
catalogues or in the online catalogue on the Internet: www.
schmersal.net.
The information contained in this operating instructions manual is pro-
vided without liability and is subject to technical modifications.
There are no residual risks, provided that the safety instructions as well
as the instructions regarding mounting, commissioning, operation and
maintenance are observed.
1.5 Warning about misuse
In case of improper use or manipulation of the safety switch-
gear, personal hazards or damages to machinery or plant
components cannot be excluded when safety switchgear is
used. The relevant requirements of the standard ISO 14119
must be observed.
1.6 Exclusion of liability
We shall accept no liability for damages and malfunctions resulting from
defective mounting or failure to comply with this operating instructions
manual. The manufacturer shall accept no liability for damages result-
ing from the use of unauthorised spare parts or accessories.
For safety reasons, invasive work on the device as well as arbitrary re-
pairs, conversions and modifications to the device are strictly forbidden;
the manufacturer shall accept no liability for damages resulting from
such invasive work, arbitrary repairs, conversions and/or modifications
to the device.
2. Product description
2.1 Ordering code
This operating instructions manual applies to the following types:
PS116-
-
-
-
No. Option
Description
Z11
Snap action 1 NO contact / 1 NC contact
Z02
Snap action 2 NC contacts
Z12
Snap action 1 NO contact / 2 NC contacts
Z11R
Snap action 1 NO contact /
1 NC contact with latching
Z02R
Snap action 2 NC contacts with latching
Z12R
Snap action 1 NO contact / '
2 NC contact with latching
T11
Slow action 1 NO contacts / 1 NC contact
T02
Slow action 2 NC contacts
T20
Slow action 2 NO contacts
T12
Slow action 1 NO contacts / 2 NC contact
T21
Slow action 2 NO contacts / 1 NC contact
T03
Slow action 3 NC contacts
T11UE
Slow action 1 NO contact /
1 NC contact with overlapping contacts
T02H
Slow action 2 NC contacts with staggered contacts
L200
Connecting cable bottom, cable length 2 m
L500
Connecting cable bottom, cable length 5 m
LR200
Connecting cable right, cable length 2 m
LR500
Connecting cable right, cable length 5 m
ST
Connector plug M 12, bottom
STR
Connector plug M 12, right
...
Selection of the actuating elements in the
online catalogue under www.schmersal.net
Rotation of actuating head (for versions with detent):
U1
by 45°
U2
by 90°
...
... (further in 45° increments)
U7
by 315°
In accordance with the Machinery Directive, the type plate of
safety components is type plate is labelled "safety component".
Only if the information described in this operating instructions
manual are realised correctly, the safety function and therefore
the compliance with the Machinery Directive is maintained.
2.2 Special versions
For special versions, which are not listed in the order code below 2.1,
these specifications apply accordingly, provided that they correspond to
the standard version.
EN
PS116
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the PS116 series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for schmersal PS116 series

  • Page 1 In accordance with the Machinery Directive, the type plate of safety components is type plate is labelled "safety component". Further technical information can be found in the Schmersal catalogues or in the online catalogue on the Internet: www. Only if the information described in this operating instructions schmersal.net.
  • Page 2 PS116-…-LR200-S200 Switchover time: slow action: in accordance with actuating speed Switching distance and actuator forces: refer to online catalogue at 16,6 www.schmersal.net Electrical data: Utilisation category: AC-15, DC-13 Rated operating current/voltage I - Pre-wired cable: 3 A / 240 VAC, 1.5 A / 24 VDC;...
  • Page 3 Positioning the lever 0° 15° Switching distance and actuator forces: refer to online cata- logue at www.schmersal.net Position switches with two NO contacts (-20) are not suitab- le for safety functions. 90° 5. Set-up and maintenance 5.1 Functional testing...
  • Page 4: Ec Declaration Of Conformity

    Position switches PS116 7. Appendix 7.1 EC Declaration of conformity EC Declaration of conformity Translation of the original K.A. Schmersal GmbH & Co. KG Declaration of Conformity Möddinghofe 30 42279 Wuppertal Germany www.schmersal.com We hereby certify that the hereafter described products both in their basic design and construction conform to the applicable European Directives.