Prismatibro Prisma Button 800 Installation Manual page 6

DIP-SWITCH
• There are 8 dip-switches
on the circuit board.
• When delievered - All dip
switches are set in OFF mode.
• You can activate several
dip-switches depending
on the requested functions.
NOTE
Dip-switch "Extended push" and "Nurse Bed" cannot be activated at the same time.
EXTENDED PUSH
Press and hold the push front for 1.5 seconds to activate.
Dip-switch 1: ON
NOTE
If dip-switch 8 is set ON this function will be deactivated
Press and hold the push front for 3 seconds to activate.
Dip-switch 2: ON
NOTE If dip-switch 8 is set ON this function will be deactivated
Press and hold the push front for 6 seconds to activate.
Dip-switch 1 and 2: ON
NOTE
If dip-switch 8 is set ON this function will be deactivated.
KICK FUNCTION
Requires stronger push/kick.
Dip-switch 3: On
LIMITED RELAY CONNECTING TIME
You can choose the option of a relay connecting time for
max 1 second.
It will only recieve one signal no matter the pressure time on
the push front.
Dip-switch 4: ON
ON ON
OFF 1 2 3 4 5 6 7 8
DIP
ON DIP
1 2 3 4 5 6 7 8
ON DIP
1 2 3 4 5 6 7 8
ON DIP
1 2 3 4 5 6 7 8
ON DIP
1 2 3 4 5 6 7 8
ON DIP
1 2 3 4 5 6 7 8