-
200kB Sample memory (4 seconds with 44.1 kHz/8 Bit/Mono or more with lower
samplerate)
-
Sample support for RAW 8 bit mono and WAV 8/16 bit, Mono/Stereo
-
Projects as many as the SD card can hold
Firmware Features
-
8 Tracker tracks can be controlled independently, synchronised and not synchronised
-
Pattern chaining
-
Probability (0..100% with 1% resolution) for CV, Mod, Gate, Tables and FX (which can
contain every feature)
-
Patterns with Note Scaled input, Patch selection, Trigger/Gate w retrigger/ratcheting, CV
Modulation manipulation, Groove, Fine pitch, Glide, Glide quantisation, Table selection
-
4 FX possibilities per pattern per step (Internal CV/Gate tracks)
-
Groove per step per pattern to create different step lenghs, shuffle and weird rhythmics with
the possibility to create poly-rhythmic tracks
-
Patches with all wanted functions directly accessible
-
Tables (sequencer in the sequencer) for Transpose and all possible functions, different
speed scales and sources, synchronised and not synchronised to the main sequencer clock
-
Automation slots to assign different automations (like LFO, Envelopes, Noise,
Randomness..etc) (2DO)
-
Project management
-
Sample management
-
Clock Source can be Internal, 1/16 via Clock input, 24ppqn, Sync24, Midi Clock
-
Clock Outputs can be 1/16, 24ppqn(2do), sync24 (2do), Midi Clock
-
All Modular tracks can be manipulated from other Modular tracks
-
Trigger functions with different timings for ON/OFF, OFF/ON, Retriggering
-
Gate length can be as short or long as needed (much shorter than steplength possible)
-
advanced Mark + Copy + Paste functions to copy marked parts within or between patterns
-
Sample pitch in note scale
-
Sample effects like Volume, Fine Pitch, Retrigger, Backwards, Bitcrush, Distortion ... more
to come
-
Enable/Disable edit mode so nothing can be changed accidentally on live situation
-
Live editing while playing including pattern creation, manipulation, recording, nearly all
functions accessible while playing
Nerdseq – a tracker based Eurorack sequencer
User Manual Revision V0.9.9 for Firmware V1.13
Page 6
27 February 2018
Need help?
Do you have a question about the Nerdseq and is the answer not in the manual?