Table of Contents
Advertisement
Pattern Screen
The Pattern screen is the screen where you actually fill in your notes or data to sequence.
Depending on which Track you selected there are different pattern screen functions. Here you
The CV/Trigger/Mod patterns have the following Columns:
Notes, Patch, Table, Trigger, Mod, FX1..4 and Groove
• Notes: To put in music notes ( C-4 for Note C in octave 4; D#5 for Note 'Dis or d-sharp' in
octave 5)
[
ON when a note is being played and the Gate is OFF when a Note off occurs. The Gate will
also automatically go to Off and On again if no note off was set but a new note is playing,
this to retrigger a new note. (plans are to make that changeable)
Patch can select a patch which is loaded before a note plays. With it you can change
patches with every sequencer step
Nerdseq – a tracker based Eurorack sequencer
User Manual Revision V0.9.9 for Firmware V1.13
] is the lowest 'note' and it is for note off. For the Modular tracks, the Gate is
Page 17
27 February 2018
Advertisement
Table of Contents
