Table of Contents
Advertisement
See the chart below for a graphical explanation of the trigger handling.
• MOD changes the Modulation output of the track to a value 000 - FFF (range from 0 - 10
Volt or -5/+5 Volt)
•
FX They are several special effects and parameters that can be changed (a growing list)
For now they are the following effects for the modulation tracks:
• PTCH →
change. 41 and higher changes the pitch higher and 3f and lower change the pitch
lower. The pitch will stay until a new note is triggered
•
GL C →
Nerdseq – a tracker based Eurorack sequencer
User Manual Revision V0.9.9 for Firmware V1.13
Pitch: Changes the CV pitch in fine steps. 40 is the middle point = no
Glide CV: Lets the Note glide to the next note.
Page 19
27 February 2018
Advertisement
Table of Contents
