CONTENTS Title Page No. Parts Introduction Technical Specifications Before Using How to Install Vitro-Ceramic Hob How to Use Vitro-Ceramic Hob Cleaning and Maintenance Important Guidelines...
Thank you for choosing LEBENSSTIL KOLLEKTION Portable Vitro-Ceramic Hob. Part Identification 1. Vent 2. Heating Area 3. Ceramic Glass 4. Control Panel Technical Specifications Voltage 220 - 240V~ Wattage 2200W 50Hz Frequency Before Using Please read these instructions carefully before using and keep them for future reference.
How to Install Vitro-Ceramic Hob Table-top Installation When this product is used on a table, please note that ventilation hole shall be at least 50mm from wall surface. Push-in Installation (Install on an empty cabinet) Open an installation hole (hole size as shown) on cabinet. (Note: The depth shall be more than 150mm) ...
Place the vitro-ceramic hob into the installation hole. Insert plug into main power supply. Turn on the power and the vitro-ceramic hob is ready to be used. How to Use Vitro-Ceramic Hob Control Panel Power switch Place the cookware on the cooking zone, connect the plug and press the button for 3 seconds to turn ON the vitro-ceramic...
Press button again to exit timer setting. Boost Press this button to select the “BOOST” function, the maximum heating level will reach 8. Increase/decrease “+” or “–“ For heating function Press once to increase/decrease one heating level. For timer function ...
Important Guidelines Use only original accessories supplied. The current voltage which indicates on the plate must correspond to your local voltage. The appliance should be used only on condition that the type of power supply corresponds to the marking label.
Page 8
This marking indicates that this product should not be disposed with other household wastes throughout the nation. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Need help?
Do you have a question about the LKRH-3102P and is the answer not in the manual?
Questions and answers