Viper Mini Mkii Assembly And Use - Viper Mini MkII Assembly And Operation Manual

10.2 Viper Mini MKII Assembly and Use

Danger Rating
•
Before attaching the Viper lubricator collar to the cable, you must ensure
the cable winch control has been locked out and tagged. Serious injury or
death may occur should the cable winching equipment be activated while
the Viper Lubricator is being fitted to the cable.
•
When the Viper Lubricator has been assembled, attached to the Cable and
anchored in position, the lubrication system can be activated. While in
operation the grease pump can generate up to 5,500 PSI grease pressure.
Under no circumstances should the Viper collar be opened, or the grease
hose disconnected while under pressure as this can cause serious injury.
•
While in operation the Viper Lubricator utilises both high pressure air, up to
120 PSI max and high pressure grease up to 5,500 PSI. Always wear
appropriate PPE (Personal Protective Equipment) while carrying out the
cable lubrication operation.
•
Suggested PPE includes, safety glasses, leather gloves, safety boots, long
sleeved shirts, high visibility vest, hard hat and hearing protection.
•
Lubrication Engineers recommend to only use pumps, fittings, hoses and
accessories supplied or recommended Lubrication Engineers. All of our
components have been tested to ensure they will work safely and effectively
for extended duty cycles. Using non-approved components may lead to
unexpected failure of the Viper Lubricator and / or its components causing
serious injury to maintenance personal.
Page | 23