Network Connections - Roland XS-42H Reference Manual

Network Connections

You can remotely control this unit from a computer or tablet on the network.
Remote control methods
The following two methods of remote control are provided.
Control from a web browser
You can use a web browser such as on your computer to remotely
control the unit's operating panel and menu settings.
Enter the specified URL in your web browser, and start the WebRCS
web application to control the unit from your web browser.
For details, refer to "WebRCS Web Application" (p. 17).
Control by sending commands
You can send commands from your computer to remotely control the
unit's operating panel and menu settings.
For details on the commands to transmit, refer to "LAN/RS-232
Command Reference" (p. 25).
Specifying the unit's network settings
1
Long-press the [MENU] button 0 "System" 0 select
"Network" and press the [ENTER] button.
2
Set the following menu items appropriately for your
network.
Menu item Explanation
Selects how settings are made for the IP address,
subnet mask, and default gateway.
* Changed settings are applied at next start-up.
DHCP Server:
DHCP server functionality is enabled. The information
needed for connecting to the network is assigned
automatically by this unit to the computers that are
on the LAN.
IP Configure
DHCP Client:
The IP address and other information needed for
connecting to the network is obtained automatically
from the DHCP server of the LAN.
Manually:
The IP address, subnet mask, and default gateway are
specified manually.
IP Address Shows the IP address. (*1) (*2)
Subnet Mask Shows the subnet mask. (*1) (*2)
Default
Shows the default gateway. (*1) (*2)
Gateway
MAC Shows the MAC address.
(*1) Manual settings can be made only if "IP Configure" is set to
"Manually. "
(*2) The identification number "0.0.0.0" is shown until a network
connection is established.
3
Press the [MENU] button several times to close the menu.
14
Specifying your computer's network settings
Windows
1
Working in sequence, click the [
"Settings" (gear icon).
2
Click "Network and Internet."
3
Click "Change Adapter Options."
4
Right-click the network connection you're using, then
click "Properties."
5
Select "Internet Protocol Version 4 (TCP/IPv4)" and click
the [Properties] button.
6
Select the "Obtain an IP address automatically" and
"Obtain DNS server address automatically" options, and
click the [OK] button.
(Start)] button 0